Pantech GF200 - Manual (Page 46)

91
• Read Unit: Reads the cost unit.
• Set Unit: Sets up the current cost unit and the cost per unit
GPRS Info
Select ‘Menu > 3.Call Logs > 7. GPRS Info’.
It displays the GPRS data transmission capacity.
• Current Info: Displays the total transmitted Kbytes at the moment.
• Last Info: Displays the total transmitted Kbytes in the past.
• All Info: Displays the total transmitted Kbytes since connected.
• Clear Logs: Deletes the log related to GPRS.
90
Delete Call Logs
Select ‘Menu >3.Call Logs >4.Delete Call Logs’.
It deletes the missed, received, or dialled calls or deletes all
the call records with ‘All Calls’.
Press the [Yes] Soft key [ ] or [No] Soft key [ ] to
execute or cancel this function.
Call Timer
Select ‘Menu > 3.Call Logs > 5.Call Timer’.
Indicates information on call time.
• Last Call Time: Date and Time.
• Received, Dialled, All Call Time: Call Time only.
• Reset Call Times: Initialises the call timer. Press the [ ] key and
input the phone password. And then press the
[ ] key one more time.
Call Cost
Select ‘Menu > 3.Call Logs > 6.Call Cost’.
Records information on call cost, and limits the call charge to
prevent overcharges.
• Last Call Cost: Displays the cost of the last call.
• All Call Cost: Displays the cost of all calls.
• Clear Logs: Inputs PIN2 to delete all the logs of call cost.
• Max Cost: Reads or sets up the maximum value of the call cost unit
in the service area.
- Read Limit: Reads the maximum unit value.
- Set Limit: Sets up the maximum units.
• Cost Unit: Reads or sets up the unit defined in a service area.
This function has the following sub options.
This function has the following sub options.