Pantech GF200 User Manual
Page 20
39
Making a Call
Enter the area code and the phone number to make a call in
standby mode, and press the [ ] key.
To clear the last digit displayed, press the [ ] key.
To clear the all digits displayed, press and hold the [ ]
key.
Ending a Call
When you want to finish your call, press the [ ] key or
close the folder.
Once the call is completed, a call summary (Receiver Name
or Number, Service Time) will be displayed.
Using Call Logs
The phone stores up to 30 dialled, received or missed calls
chronologically. The last call is saved in the first position. If
the same number was dialled more than once, only the latest
occurrence will be saved.
1
Press the [ ] key to see the call log list aligned dialled,
chronologically.
38
S
witching the Phone On or Off
Switching the Phone On
1
Open the folder.
2
Press the [ ] key until the phone switches on.
3
If the handset requests you to input the PIN, enter the PIN and
press the [ ] Soft key.(For further details, see Menu 6.7)
Your handset starts to search for an available network and
the current date and time will appear on the internal and
external displays. Once connected to the network, you can
send or receive a call.
If a malfunction occurs while using the handset or it is not
turned on, remove the battery and install it again after 5 or 10
seconds.
Switching the Phone Off
To switch the phone off, press the [ ] key until the power-
off animation displays.
To change the language, use the Language menu option (Menu 6.3).
NOTE
If you have set the [Auto redial] option (Menu 6.2.3) to [On], the
handset will attempt to make a call automatically for up to 10 times if
it is not answered.
NOTE
M
aking a Call