Philips AW2000 - Manual (Page 12)

10 EN
3
As instructed, briefly press WI-FI SETUP
on the back of AW2000.
» The power/status indicator starts to
blink amber and white alternately.
» A new Wi-Fi network created by
AW2000 will appear, with the network
name (SSID) of Philips_Install.
4
Tap Next on the above app screen, and
then read how to proceed with network
setup.
< 30S
< 3S
5
As instructed, exit the app, and then select
Philips_Install from the list of available
Wi-Fi networks.
6
Make sure that your iOS device is
connected to Philips_Install, and then go
back to Philips AirStudio.
7
Wait until Speaker found appears at the
bottom on the above app screen.
» After a short while, a password input
box appears automatically.