Philips SPF1007/10 - Manual (Page 6)

. Getting started
3.1 Placing the Product
The PhotoFrame should be placed on a flat
surface and close to a power socket. Keep it
away from high temperatures and high levels of
moisture
3.2 Connecting to the mains
Connect the supplied power cable from
PhotoFrame to a power outlet.
Note:
For safety reasons and best stability Philips
recommend to install the stand well properly.
Using other positions may cause the PhotoFrame
to fall and it is the responsibility of the user.
3.3 Initial Setup
3.3.1 Setting the Language
Press the Mode button to toggle to the Main
Menu, select the Setup and
Up / Down
to Language.
1 Press Up and Down to select your
preferred language (select between English,
French, Spanish, Italian, German,
Dutch, Danish, Simplified Chinese
2 Press the Play/OK button to confirm
your selection. The new setting will be effective
immediately.
Press the Mode button to leave this menu and
play the slideshow.
Getting Started
1
2
Install the stand
Place the head of the stand in the socket.
Rotate counterclockwise until the stand clicks
into place.
Use this function to set the time and date of the
PhotoFrame
1 • Press the Mode button to access the
Main Menu.
• Press Up /Down to highlight Clock and
press Play/OK.
3.3.2 Setting Time, Date