Philips 60PW9383 User Manual
Page 60
Product Type
Rear-projection HDTV Monitor
Television System
NTSC standard
Channel Coverage
VHF: 2–13
UHF: 14–69
Cable TV: Midband
Superband
Hyperband
Ultraband
Ambient Operating Temperature
+41 to 113ºF (+5 to +45ºC)
Mains Voltage
AC 110 ±10%
Power Consumption
180W (average)
Standby Power
<1 W
Audio
Frequency response: 20Hz–15kHz, +1/–3dB (ampl.)
Stereo output with 2 x 15W RMS
Two sets of 2” and 5” speakers.
Speaker Type
51-mm (2 in.) tweeters and 127-mm (5 in.) woofers
Video/Audio Terminals
INPUT-AV 1
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
COMPONENT VIDEO INPUTS (YPbPr)
Y INPUT: 1.0Vp-p (includes sync), 75 ohms
Pb INPUT: 700mVp-p, 75 ohms
Pr INPUT: 700mVp-p, 75 ohms
(The Pb INPUT jack can also receive signals from outputs
labeled Cb or B-Y.The Pr INPUT jack can also receive sig-
nals from outputs labeled Cr or R-Y.)
S-VIDEO INPUT (INPUT-AV 1, INPUT-AV2, side panel)
Y-INPUT: 1 Vp-p (includes sync), 75 ohms
C-INPUT: 300 mVp-p, 75 ohms
INPUT-AV 2
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
HD INPUT-AV 4
Component Video YPrPb/RGB (See page 59.)
AUDIO: 500 mVrms, 30 kohm
HD INPUT-AV 5
Digital video interface (DVI) (See page 59.)
AUDIO: 500 mVrms, 30 kohm
CENTER CHANNEL INPUT
VIDEO/AUDIO OUTPUT
VIDEO: 1 Vpp, 75 ohms
AUDIO: Fixed: 500 mVrms into ˙10 kohm
Variable: 0–2 Vrms into ˙10 kohm
SUBWOOFER OUTPUT
Side Panel (AV3)
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
HEADPHONE: 1.5 Vrms, 16 ohm
Picture Visible Area
55PW9383: 55 in.
60PP9383: 60 in.
Dimensions (W” x H” x D”)
55PW9383: 52.6 x 57 x 25.6
60PW9383: 56.7 x 59.4 x 27
Weight (does not include carton)
55PW9383: 190 lb
60PW9383: 210 lb
Supplied Accessories
Remote control with two size “AA” batteries.
Design and specifications are subject to change without notice.
60
M
ODEL
S
PECIFICATIONS
Appendix B
B
A
ppendix