Panasonic PT-D5500U - Manual (Page 48)

48
Using Web Browser Control
If requesting service, ask your nearest Authorized Service Centre.
Error information page
When is displayed on the status information screen, click it to display the error details.
• Depending on the nature of the error, the projector may be placed in the standby mode for its own
protection.
Note
When [FAILED] has appeared for an item
OK: Normal operation
FAILED: Occurrence of trouble
LAMP REMAIN TIME
The lamp runtime has exceeded the prescribed cumulative time, and it is now time
to replace the lamp.
The lamp has failed to light.
Parameter
FAN
INPUT AIR
TEMPERATURE The input air temperature is too high. It may be that the projector is being used
where the ambient temperature is high such as near a heating appliance.
Trouble has occurred in the fan or its drive circuit.
Consult your dealer.
OPTICS MODULE
TEMPERATURE
The temperature inside the projector is high.
MAIN CPU BUS Trouble has occurred in the microcomputer circuitry. Consult your dealer.
LAMP STATUS
Trouble has occurred in the temperature detection sensor inside the projector.
Consult your dealer. OPTICS MODULE
TEMP. SENSOR
INPUT AIR TEMP.
SENSOR Trouble has occurred in the sensor used to detect the input air temperature.
Consult your dealer.
BATTERY
The backup battery has been run out.
Consult your dealer.
COLOR WHEEL
Trouble has occurred in the color wheel or the color wheel drive circuit.
Consult your dealer.
Description