Paxar 611 - Manual (Page 53)

Users Manual - 610/611/612 Printers Troubleshooting
••
49
204 Source field must be 0 to 999.
205 Copy type must be 1 (Copy after rules) or 2 (Copy before rules).
206 Increment / Decrement selection must be I (increment) or D (decrement).
207 Incrementing start position must be 0 to 2710.
208 Incrementing end position must be 0 to 2710.
209 The incrementing amount must be 0 to 999.
210 Security value for a PDF417 bar code must be 0 to 8.
211 Narrow element value is less than 1 or greater than 99.
212 Wide element value is less than 1 or greater than 99.
213 Dimension must be 1 to 30 for a column or 3 to 90 for a row.
214 Truncation code must be S (standard) or T (truncated bar code).
215 Aspect code must be C (columns) or R (rows).
216 Option definition must be S (set) or T (template).
217 Input device must be D (default), H (host), K (keyboard), N (none), or S (scanner).
218 Pad direction must be L (from left) or R (from right).
219 Pad character is outside the range 0 to 255.
220 Check digit selection must be G to generate check digit.
221 Primary or secondary price format is outside the range 1 to 15.
222 Data type restriction is outside the range of 1 to 6.
223 Option is not valid for the field.
224 Bar code Intercharacter gap must be 0 to 99 in printer dots.
251 Power up mode must in 0 (online) or 1 (offline).
252 Language selection must be 0 (English).
253 Batch separator code must be 0 (off) or 1 (on).
254 Slash zero selection must be 0 (standard zero) or 1 (slash zero).
255 Supply type must be 0 (black mark), 1 (die cut), or 2 (continuous).
256 Ribbon selection must be 0 (direct) or 1 (transfer).
257 Feed mode must be 0 (continuous) or 1 (On-Demand).
258 Supply position is outside the range.
259 Contrast adjustment must be –390 to 1000 dots.
260 Print adjustment must be –99 to 99 dots.
261 Margin adjustment must be –99 to 99 dots.
262 Speed adjustment is invalid.