beautypg.com

Paxar 611 User Manual

Page 44

background image

40

••

Care and Maintenance

Users Manual - 610/611/612 Printers

9. Snap the printhead into place.

Make sure the printhead cable does not

touch the ribbon roll.

10. Clean the new printhead with a cotton swab dipped in isopropyl alcohol to remove

any salt or oil left from handling.

11. Let the printhead dry and reload your supplies.

12. Close the printhead assembly and the cover.

13. Turn on the printer.

14. Press Feed to position the supply under the printhead.

Do not touch here

This manual is related to the following products: