Paxar 611 - Manual (Page 13)

Users Manual - 610/611/612 Printers Loading Supplies
••
9
Loading Supplies
This chapter describes how to load a roll of supply and a ribbon roll.
You can use Paxar's fabric label kits containing fabric labels and ribbon. If you switch
from black mark to continuous supplies make sure the DIP switches are set correctly.
Make sure you use only approved Paxar supplies. See Appendix A, "Specifications
and Accessories" for a list of Paxar supplies or contact your Paxar Representative for
more information.
If you experience label jamming with narrow supplies in humid environments, store
supplies separately from the printer in a dry, less humid environment.
CAUTION
The width of the ribbon must be greater than the supply
width. Since some supplies are more abrasive to printheads
than others, using a ribbon wider than your supply helps
protect the printhead. Failure to do this may void your
printhead warranty. Replacement printheads are expensive.