Panasonic KX-FP155 - Manual (Page 32)

32
Sending Faxes
STOP
FACE DOWN
Display
SET
1 Insert the document FACE DOWN.
● If necessary, press or repeatedly to
select the desired resolution (p. 28).
2 Press .
Display:
3 Press or until the following is
displayed.
4 Press to start programming the
stations you want to transmit.
5 Press or until the desired station
you want to transmit is displayed.
Example:
6 Press .
● To program other stations, repeat steps 5
and 6 (up to 20 stations).
7 Press to start transmission to the
programmed stations.
● The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
● After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (p. 35).
SET
DIR=Bill [01]
SEND:PRESS SET
SET
Bill
6543210
DIR= [00]
NAVI.[+ -] A & A SET
SET
1 TIME 1 BROAD>
PRESS SET
DIRECTORY[+ -]
H
One time broadcast transmission !
This feature is useful for sending the same document to selected parties only once. Select the
parties for each transmission.
Note:
● If you select the “FINE”, “SUPER FINE” or
“PHOTO” resolution, the number of pages
that the unit can transmit will decrease.
● If the document exceeds the memory capacity
(p. 85), sending will be canceled.
● If one of the stations is busy or does not
answer, the station will be skipped. All
skipped stations will be redialed up to 2 times
after all of the other stations have been
called.
To cancel the broadcast setting
1. Press while the unit displays the following
message.
Display: 1 BROADCASTING
STOP
● The display will show the following.
2. Press . SET
SEND 1 CANCELED?
YES:SET/NO:STOP