PRESTIGIO P460MW - Manual (Page 33)

33 PRESTIGIO P400MW / P460MW
ENG
Teletext (option)
Teletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weath-er,
television programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of
a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more
modern methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext.The initial page or last page appears on the screen.Two page numbers, TV station
name, date and time aredisplayed on the screen headline. The first page numberindicates your selection, while the second
shows the cur-rent page displayed.Press the TEXT button to switch off teletext. The previousmode reappears.
SIMPLE text
Page selection
1. Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong
number, you must complete the three digit number and then re-enter the correct page num-ber.
2. The /\ / \/ button can be used to select the preced-ing or following page.
Programming a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the button ‘—M’ to switch to LIST mode.
Four teletext page numbers of your choice can be colour coded and easily selected by pressing the corresponding
coloured button on the remote control handset.
1. Press a coloured button.
2. Using the NUMBER buttons, select the page you wish to programme.
3. Press the OK button. The selected page is stored as the selected page number, blinking once to confirm this. From now
on, you can select this page with the same coloured button.
4. The three other coloured buttons are programmed in this way.
TOP text (option)
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the
next group and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alter-
natively the /\ button can be used.
4. The red button permits to return to previous selection. Alternatively the \/ button can be used.