Powermatic 2013 - Manual (Page 9)

9
Unpacking
Open shipping container and check for shipping
damage. Report any damage immediately to
your distributor and shipping agent. Do not
discard any shipping material until the Band Saw
is set up and running properly.
Compare the contents of your container with the
following parts list to make sure all parts are
intact. Missing parts, if any, should be reported
to your distributor. Read the instruction manual
thoroughly for assembly, maintenance and
safety instructions.
Contents of the Shipping Container
1 Band Saw
1 Miter Gauge
1 Front Rail
1 Rear Rail
1 Guide Rail
1 Fence
1 Fence Body
1 Combination Wrench - 10/12mm
1 Bag of Fasteners, containing:
2 Hex Cap Screws, 5/16-18 x 1-1/4”
4 Hex Cap Screws, 5/16-18 x 3/4”
6 Flat Washers, 5/16”
6 Lock Washers, 5/16”
7 Hex Cap Screws, 1/4-20 x 5/8”
7 Flat Washers, 1/4”
7 Lock Washers, 1/4”
1 Owner's Manual
1 Warranty Card
Read and understand the entire contents of this manual before attempting set-up
or operation! Failure to comply may cause serious injury.