Disable the dhcp, Dhcp relay, 4 dhcp relay – Paradyne 6212 User Manual

Page 46: 2 disable the dhcp

Text mode
Original mode

46 June 2004 6212-A2-GB20-10

5.3.2 Disable

the

DHCP

STEP 1: Click on DHCP from the menu bar.

STEP 2: Choose a DHCP entry, then click on Delete.

5.4 DHCP

Relay

The DHCP packet format is based on a BootP packet. As a result, DHCP uses the BootP relay
agent to forward DHCP packets. This scheme provides interoperability between existing BootP
clients and DHCP servers. The BootP relay agent uses the same criteria and methods for
forwarding both DHCP and BootP packets. The DHCP Relay is disabled by default. To enable it
complete the following steps:

STEP 1: Access the DHCP Relay screen by clicking on DHCP on the Advanced Menu, and then

clicking on the DHCP Relay tab.

STEP 2: In the DHCP Relay field, select Enable, and enter the IP Address you want to receive

BOOT REQUEST or DHCP packets from clients.

STEP 3: Click on the Apply button.