Panasonic AJ-D455P - Manual (Page 23)

23
USER menu
(continued)
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
005 TAPE 0000
±
12h
TIMER 0001 24h
007 CHARA 0000 WHITE
TYPE 0001 W/OUT
008 REMAIN 0000 OFF
SEL 0001 2L
0002 1L
0003 R/TTL
The underline on the setting item denotes the initial setting.
This selects the 12 or 24 hour display for the CTL counter.
0: 12 hour display
1: 24 hour display
This selects the display type for the super display output to the
VIDEO OUT 3/SERIAL OUT 3* connector as well as for
displays such as the setting menu, etc.
0: White characters against a black background.
1: White characters with a black border.
For selecting whether to display the remaining tape time and
total tape length as the superimposed display at the VIDEO
OUT 3/SERIAL OUT 3* connector.
0: No display appears.
1: Remaining tape time is displayed on the second line.
2: Remaining tape time is displayed on the first line.
3: Remaining tape time is displayed on the first line and the
total tape length on the second line.
• When setting 1 (2L) has been selected, the display does not
appear if 0 (TIME) has been selected for the setup menu No.
003 (DISPLAY SEL) setting.
• When setting 3 (R/TTL) has been selected, the total tape
length will not appear if 0 (TIME) has been selected for the
setup menu No. 003 (DISPLAY SEL) setting.
* The SERIAL OUT 3 con-
nector functions only
when the AJ-YA455P
serial interface board
(optional accessory) is
used.