Philips 19PFL5403/60 - Manual (Page 9)

EN-7
EN
3 Get started
This section helps you position and install the
TV and supplements the information provided
in the Quick Start Guide.
Note: D Refer to the Quick Start Guide for
stand mounting instructions.
3.1 Position the TV
In addition to reading and understanding the
safety instructions in Section 1.1, consider the
following before positioning your TV:
The ideal viewing distance for watching TV •
is three times its screen size.
Position the TV where light does not fall on •
the screen.
Connect your devices before you position •
your TV.
• Your TV is equipped with a Kensington
Security Slot at the back of the TV. If
connecting an anti-theft Kensington lock
(not supplied), position the TV within reach
of a permanent object (such as a table) that
can be easily attached to the lock
3.2 Wall mount the TV
WARNING: Wall mounting of the B
TV should only be performed by
qualifi ed installers. Koninklijke
Philips Electronics N.V. bears no
responsibility for improper mounting
that results in accident or injury.
Step 1 Purchase a
B VESA-compatible
wall bracket
Depending on the size of your TV screen,
purchase one of the following wall brackets:
TV screen
size
(inches/
cm) VESA-
compatible
wall bracket
type
(millimeters) Special
instructions
19”/48cm
20”/51cm
22”/56cm
Adjustable
100 x 100 None
26”/66cm Adjustable
100 x 200
Step 2 Connect cables
Connect the antenna cable, mains cord and
all other devices to the back of the TV as
described in the following sections.
Step 3 Secure the VESA-compatible wall
bracket to the TV
WARNING: Only use the bolts (M4 B
for all models) and spacers (4cm)
to secure the VESA-compatible wall
bracket to your TV.
The bolts are designed to match
the weight of your TV; spacers are
designed for easy cable management.
Note: D Depending on your VESA-compatible
wall bracket, you may need to separate the
mounting plate from the wall bracket for
easier installation. Refer to your VESA-
compatible wall bracket documentation for
instructions.