Polaris Outlaw - Manual (Page 74)

71
OPERATION
Break-In Period
1. Fill the fuel tank with gasoline. See page 62.
2. Check the oil level on the dipstick. See page 105. Add oil if necessary to maintain the
level between the safe and add marks.
3. Allow the engine sufficient time to warm up before operating.
4. Drive slowly at first. Select an open area that allows room to familiarize yourself with
vehicle operation and handling.
5. Vary the throttle positions. Do not operate at sustained idle.
6. Perform regular checks on fluid levels, controls and areas outlined on the daily pre-ride
inspection checklist. See page 72.
7. During the break-in period, change both the oil and the filter after one hour of
operation, or after using the first tank of fuel.