beautypg.com

14 menu operations, Using the auto-equalizer, Using sonic center control – Pioneer AVH-P4200DVD User Manual

Page 56: Adjusting loudness, Using subwoofer output

background image

2

Touch Graphic EQ on the audio function

menu.

3

Touch c or d to select the desired item.

Powerful

—Natural—Vocal—Custom1—

Custom2

—Flat—Super Bass

4

Touch the Equalizer band to adjust.

5

Touch a or b to adjust the level of the

equalizer band.
Range:

+12dB to -12dB

# You can then select another band and adjust
the level.

Using the auto-equalizer

The auto-equalizer is an equalizer curve cre-
ated by auto EQ (refer to Auto EQ (auto-equaliz-
ing) on page 64).
You can turn the auto-equalizer on or off.
If you connect an optional microphone to this
unit, you can use this function.

1

Display the audio function menu.

Refer to Introduction of menu operations on
page 54.

2

Touch Auto EQ to turn the auto-equali-

zer on or off.

# You cannot use this function if auto EQ has
not been carried out.

Using sonic center control

Sound that is suited for the listening position
can easily be created with this function.

1

Display the audio function menu.

Refer to Introduction of menu operations on
page 54.

2

Touch Sonic Center Control on the

audio function menu.

3

Touch c or d to select a listening posi-

tion.
Range:

Left:7 to Right:7

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-frequency ranges at low volume.

1

Display the audio function menu.

Refer to Introduction of menu operations on
page 54.

2

Touch Loudness on the audio function

menu.

3

Touch c or d to select a desired level.

Off (off)

—Low (low)—Mid (mid)—High

(high)

Using subwoofer output

This unit is equipped with a subwoofer output
which can be turned on or off.
! The cut-off frequency and output level can

be adjusted when the subwoofer output is
on.

1

Display the audio function menu.

Refer to Introduction of menu operations on
page 54.

2

Touch Subwoofer on the audio function

menu.

3

Touch On or Off next to Subwoofer to

turn the subwoofer output on or off.

4

Touch Normal or Reverse next to Phase

to select the phase of subwoofer output.

5

Touch c or d next to Level to adjust

the output level of the subwoofer.
Range:

+6 to -24

6

Touch c or d next to Frequency to se-

lect the cut-off frequency.
50Hz

—63Hz—80Hz—100Hz—125Hz

Only frequencies lower than those in the se-
lected range are outputted from the subwoo-
fer.

En

56

Section

14

Menu operations