Pioneer AVH-P4200DVD - Manual (Page 78)

Message Cause Action
Error. Please
check xxxx
speaker. The microphone
cannot pick up
the measuring
tone of a speaker.
! Confirm that the
speakers are con-
nected correctly.
! Correct the input
level setting of the
power amp con-
nected to the
speakers.
! Plug the micro-
phone securely
into the jack.
Error. Please
check noise. The surrounding
noise level is too
high.
! Stop your car in
a place that is
quiet, and switch
off the engine, air
conditioner and
heater.
! Set the micro-
phone correctly.
Error. Please
check battery. Power is not
being supplied
from the battery
to this unit. ! Connect the bat-
tery correctly.
! Check the battery
voltage.
Understanding messages
Messages Translation
CAUTION: Screen
image may appear re-
versed.
Pioneer recommends
the use of a camera
which outputs mirror-
reversed images.
Otherwise, the screen
image will appear re-
versed.
Indicator list
Area 1 Area 2
Area 3
Area 1
Indicates that the selected fre-
quency is being broadcast in
stereo.
Indicates that a Bluetooth tele-
phone is connected.
Indicates that the digital format is
Dolby Digital.
Indicates that the digital format is
MPEG Audio.
Indicates that the digital format is
Linear PCM.
Indicates the sampling frequency.
Indicates that the digital format is
DTS.
1+1ch
2 ch
Mch
Indicates the audio channel.
Indicates that a disc with PBC On
is being played.
En
78
Appendix
Additional Information