Pioneer AVH-P4200DVD - Manual (Page 30)

8
Turning automatic answering
on or off.
Refer to Setting automatic an-
swering on page 48.
Touch and hold for more
than two seconds to connect
to a Bluetooth telephone
automatically.
Refer to Connecting to a Blue-
tooth device automatically on
page 52.
9
Turning the ring tone for in-
coming calls on or off.
Refer to Switching the ring
tone on page 48.
Touch and hold for more
than two seconds to display
the BD address of your cellu-
lar phone and the Bluetooth
adapter.
Refer to Displaying BD (Blue-
tooth Device) address on
page 52.
a
Switching between Bluetooth
telephone and Bluetooth
audio.
Touch and hold for more
than two seconds to start
voice recognition.
Refer to Voice recognition on
page 52.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone. This entails establishing a
Bluetooth wireless connection between this
unit and your phone, registering your phone
with this unit, and adjusting the volume level.
1 Connection
First, you need to connect a Bluetooth telephone
to this unit.
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless technol-
ogy, see following section. Using a cellular phone
to initiate a connection on page 51 and Registering
a connected cellular phone on page 52.
2 Volume adjustment
Adjust the earpiece volume of your cellular phone
to your preference. The unit will record the ad-
justed volume level as the default setting.
! The volume of the caller’s voice and ring tone
may vary depending on the type of cellular
phone.
! If there is a large volume difference between
the ring tone and caller
’s voice, the overall vo-
lume level may become unstable.
! Make sure to adjust the volume to a proper
level before disconnecting the cellular phone
from the unit. If the volume is muted (zero
level) on your cellular phone, the volume level
of your cellular phone remains muted even
after the cellular phone is disconnected.
Bluetooth audio operations
When you connect a Bluetooth adapter (e.g.
CD-BTB200)(sold separately) to AVH-
P4200DVD/AVH-P3200DVD, you can control
Bluetooth audio.
Important
! Depending on the Bluetooth audio player con-
nected to this unit, the available operations
will be limited to the following two levels:
— A2DP profile (Advanced Audio Distribution
Profile): You can only playback songs on
your audio player.
— AVRCP profile (Audio/Video Remote Con-
trol Profile): You can perform playback,
pause playback, select songs, etc.
En
30
Section
12 Using Bluetooth wireless technology