Pioneer PDP-5030HD - Manual (Page 8)

E-5
Preparation
Installing the Plasma Display
Locating
• Avoid the direct sunlight. Keep enough ventilation.
• The length of the system cable used to connect the
Plasma Display and the Media Receiver is about 3
m (118 inch).
• Because the Plasma Display is heavy, be sure to
move it by more than two persons.
L
• If you place anything on top of the Media Receiver it will
not receive enough ventilation and not operate properly.
A
• Keep enough space around the upper and back parts
when installing in order to ensure ventilation around the
backside.
Using the optional PIONEER stand
• For details on installation refer to the instruction
manual provided with the stand.
L
• This product may be used only with model PDK-TS01
stand, use with other stands may result in instability
causing possible injury.
Using the optional PIONEER speakers
• For details on installation refer to the instruction
manual provided with the speaker.
L
Operating Environment
Operating environment temperature and humidity: e0°C to
e40°C (e32F to e104F); less than 20 % to 80% RH (cooling
vents not blocked)
Avoid installing in the following locations:
• Under direct exposure to sunlight,
• Under strong artificial light,
• In high humidity,
• Poorly ventilated.
Over
10 cm
(3
15 /
16
inch )
Over 50 cm
(19
11 /
16
inch)