Panasonic SC-PT954 - Manual (Page 21)

21
Usi
n
g on
-scre
e
n
me
n
u
s
RQ
TX01
05
∫ Menu 2 (Video)
∫ Menu 3 (Audio)
∫ Menu 4 (HDMI)
Confirming HDMI information
e.g.
1 Connection status
2 Shows the output signal type.
3 Shows the number of audio channels.
4 (
➜ above, VIDEO FORMAT)
5 ( ➜ above, COLOR SPACE)
[Note]
When “OFF” is selected in “AUDIO OUT” (
➜ 24, “HDMI” menu),
“– – –” will be displayed in “AUDIO STREAM”.
DATE DISPLAY
[JPEG] To select “ON” or “OFF” for picture’s
date display
ROTATION
To rotate a picture (during pause)
[JPEG] : 0
,------. 90,------.180,------.270
^--------------------------------------------J
PICTURE MODE
NORMAL
CINEMA1:
Mellows images and enhances
detail in dark scenes.
CINEMA2: Sharpens images and enhances
detail in dark scenes.
DYNAMIC: Enhances the contrast for powerful
images.
ANIMATION: Suitable for animation.
ZOOM
To select zoom sizes
NORMAL, AUTO,
k2, k4
TRANSFER
MODE
If you have chosen “480p”/“720p”/“1080p”
(progressive), “1080i” (interlaced)
[“VIDEO FORMAT” in Menu 4 (HDMI)] or
“PROGRESSIVE” under “VIDEO OUT (I/P)”
(
➜ 23, “VIDEO” menu), select the method of
conversion for progressive output to suit the type
of material.
≥ The setting will return to “AUTO1” when the
disc tray is opened, the unit is turned off or
another source is selected.
AUTO1: Automatically detects the film and video
content, and appropriately converts it.
AUTO2: In addition to “AUTO1”, automatically
detects film contents with different frame
rates and appropriately converts it.
VIDEO: Select when using “AUTO1” or
“AUTO2”, and the content is distorted.
DIALOGUE
ENHANCER
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel or higher,
with the dialogue recorded in the center channel)
OFF, ON
Dolby PL II
OFF, MOVIE, MUSIC
(
➜ 28, Using Dolby Pro Logic II)
J P G
DAT E
PLII
HDMI STATUS
To show HDMI information.
(
➜ below, Confirming HDMI information)
HD ENHANCER
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (
➜ 24, “HDMI”
menu) set to “ON”.
To sharpen the “720p”, “1080i” and “1080p”
picture quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (
➜ 24, “HDMI”
menu) set to “ON”.
To select suitable picture quality with your TV
(Video recordings will be converted to, and output
as, high-definition video.)
§ 480p/720p/1080p (progressive)
§ 480i/1080i (interlaced)
≥ If the picture is distorted, press and hold
[CANCEL] until the picture is displayed
correctly. (The output will return to “480p”.)
§ The numbers displayed depend on the disc
being played. One of the above numbers is
displayed.
COLOR SPACE
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (
➜ 24, “HDMI”
menu) set to “ON”.
To select suitable picture color with your TV
YC b C r (4:2:2) §
– Luminance and color details is sent
separately. Most of the picture details are in
luminance. The color rate is much higher than
composite video. Compatible for all TV
models.
YC b C r (4:4:4) §
– All color details is sent. Luminance and color
details are in same signal.
RGB
– Component video type of signal.
≥ If the setting above is not compatible with your
TV, it will not be displayed.
§ Terms are descriptions of the sample formats
used in digital video. YC
b C r is a video signal for
luminance (Y), blue (C b ) and red (C r ) details.
HDMI
HDMI --- INFORMATION
CONNECTED STATE
AUDIO STREAM
MAX CHANNEL
VIDEO FORMAT
COLOR SPACE CONNECTED
PCM
2ch
720p
YCbCr 4:4:4 1
2
3
4
5
SC-PT760-960P-PC-RQTX0105-P_eng.book Page 21 Tuesday, December 4, 2007 4:10 PM