Focus or flange-back adjustment – Panasonic WV-CL924A User Manual

Page 13

-13-

Screw

Flange-back
Adjusting Ring

The following adjustment should be made by qualified
service personnel or system installers.

1. Loosen the screw on the side of the camera.

2. Turn the flange-back adjusting ring to the desired

position.

Note:

Adjusting a focus in the visible rays may be

soft-focused with the near-infrared light.

3. Tighten the screws on the side of the camera.

Caution:

Tightening the screw by force will cause

damage to the screw or deviation of focus.

FOCUS OR FLANGE-BACK ADJUSTMENT