Appendix, Switch settings for sw1 – Pelco ESPRIT ES30PC User Manual
Page 63
C311M-N (6/06)
63
Appendix
NOTE: Esprit will sense and automatically select input from Coaxitron control signals in either the standard or extended mode. Therefore, the
DIP switch settings have no effect on Coaxitron control signals.
*SW1-3 is not used; set it in the OFF position.
*SW1-4 is not used; set it in the OFF position.
Table A. Switch Settings for SW1
Switch Setting
Baud Rate
SW1-1
SW1-2
SW1-3
2400
OFF
OFF
OFF*
4800
ON
OFF
OFF*
9600
OFF
ON
OFF*
Switch Setting
SW1-4
SW1-5
SW1-6
SW1-7
SW1-8
OFF*
Note (1)
Note (2)
Note (3)
Note (4)
NOTES:
(1)
SW1-5
OFF For controllers that have more than 32 presets.
ON For American Dynamics controllers (32 presets).
(2)
SW1-6
OFF For all control systems except CM9502 with variable speed keyboards. For CM9502 with
fixed speed keyboards, set switch OFF.
ON For CM9502 with variable speed keyboards to get smoother joystick control.
(3)
SW1-7
OFF RS-422 transmitter is not terminated.
ON RS-422 transmitter is terminated.
(4)
SW1-8
OFF 1.2 volt peak-to-peak video level.
ON 1 volt peak-to-peak video level.