Pelco ESPRIT ES30PC - Manual (Page 24)

24 C311M-N (6/06)
ALERT DISPLAY POSITION
Screen positioning of the alert label is user-defined. Positioning options include the following:
To set the alert label position:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Alert.
3. Press the Iris Open button to enter the Alert menu.
4. Position the cursor (>) beside Disp Pos.
5. Press the Iris Open button. The cursor moves to the right.
6. Move the joystick up or down to make a selection.
7. SELECT: Press the Iris Open button on your keyboard to select your choice.
CANCEL: Press the Iris Close button if you do not want to change the setting.
ACK Alert
Exit
MAIN MENU
Repeat Constant
Disp Pos
Top Right
ACK Act Always On
Alert Reset
Exit
Alert Menu
Top Left Top Right
Center
Bottom Left Bottom Right