Pelco ESPRIT ES30PC - Manual (Page 53)

C311M-N (6/06) 53
WHITE BALANCE
The settings for white balance are as follows:
• Auto white bal
• R Gain
• B Gain
To change the white balance settings:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Camera.
3. Press the Iris Open button to enter the Camera menu.
4. Position the cursor (>) beside Next.
5. Press the Iris Open button to go to the Next menu.
6. Position the cursor (>) beside White Balance.
7. Press the Iris Open button. The White Balance menu appears.
8. Position the cursor (>) beside one of the following choices and press the Iris Open button.
9. Move the joystick up or down to make a selection.
10. SELECT: Press the Iris Open button on your keyboard to select your choice.
CANCEL: Press the Iris Close button if you do not want to change the setting.
Backlight comp Off
Zoom limit x- -
Reset camera
Next
Exit
Camera Menu
ACK Alert
Exit
MAIN MENU
LowLight limit Auto
Shutter speed Auto
Auto focus mode Auto
Prev
Exit
Next Menu
Auto white bal On
Red bal level 182
Blue bal level 182
Exit
White Balance Menu