Pioneer DEH P4100UB - Manual (Page 40)

Black plate (40,1)
Disconnecting a cellular phone
1 Use MULTI-CONTROL to select
DISCONNECT PHONE in the function menu.
Device name of the connected phone appears
in the display.
2 Press MULTI-CONTROL to disconnect a
cellular phone from this unit.
After disconnection is completed,
DISCONNECTED is displayed.
Registering a connected
cellular phone
1 Use MULTI-CONTROL to select
SET PHONE in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select a regis-
tration assignment.
P1 (user phone 1)
—P2 (user phone 2)—P3
(user phone 3)
—G1 (guest phone 1)—G2
(guest phone 2)
# You can also perform the same operations by
pushing
MULTI-CONTROL up or down.
# As you select each assignment, you can see
whether or not a phone is already registered. If
the assignment is empty,
NO DATA is displayed.
If the assignment is already taken, the device
name appears. To replace an assignment with a
new phone, first delete the current assignment.
For more detailed instructions, see Deleting a re-
gistered phone on this page.
4 Press MULTI-CONTROL to register the
currently connected phone.
When registration is completed,
REG COMPLETED is displayed.
# If the registration fails, REG ERROR is dis-
played. In this case, return to step 1 and try
again.
Deleting a registered phone
1 Use MULTI-CONTROL to select
DELETE PHONE in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select a regis-
tration assignment.
P1 (user phone 1)
—P2 (user phone 2)—P3
(user phone 3) —G1 (guest phone 1)—G2
(guest phone 2)
# You can also perform the same operations by
pushing
MULTI-CONTROL up or down.
# If the assignment is empty, NO DATA is dis-
played and operation is not possible.
4 Press MULTI-CONTROL to show the con-
firmation display.
5 Turn MULTI-CONTROL to select
DELETE OK? :YES.
The phone being deleted is now on standby.
# To cancel, select DELETE OK? :NO.
6 Press MULTI-CONTROL to delete the
phone.
After the phone is deleted,
DELETED is dis-
played.
Connecting to a registered
cellular phone
Connecting to a registered phone
manually
1 Use MULTI-CONTROL to select
CONNECT PHONE in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select a regis-
tration assignment.
P1 (user phone 1)
—P2 (user phone 2)—P3
(user phone 3)
—G1 (guest phone 1)—G2
(guest phone 2)
40
Available accessories
En
40
Section
06