Using balance adjustment, Using the equalizer, Recalling equalizer curves 25 – Pioneer DEH P4100UB User Manual

Page 25: Introduction of audio adjustments, Audio adjustments, Recalling equalizer curves

Black plate (25,1)

Introduction of audio
adjustments

Press MULTI-CONTROL to display the

main menu.

Use MULTI-CONTROL to select AUDIO.

Turn to change the menu option. Press to se-
lect.

Turn MULTI-CONTROL to select the

audio function.
Turn

MULTI-CONTROL to switch between the

audio functions in the following order.
FADER/BALANCE (balance adjustment)

—

PRESET EQUALIZER (equalizer recall)

—

EQ SETTING 1 (equalizer adjustment)

—

EQ SETTING 2 (equalizer fine adjustment)

—

LOUDNESS (loudness)

—SW SETTING 1 (sub-

woofer on/off setting)

—SW SETTING 2 (sub-

woofer setting)

—HIGH PASS FILTER (high

pass filter)

—BASS BOOST (bass boost)—

SRC LV ADJUST (source level adjustment)

Press MULTI-CONTROL to display the

setting mode of each function.

Adjust the each function.

Notes

! You can also select the audio function by

pressing

AUDIO on the remote control.

! To return to the previous display, press BACK.
! To return to the main menu, press and hold

BACK.

! To return to the ordinary display, press

BAND/ESC.

! You can select the SW SETTING 2 only when

subwoofer output is turned on in
SW SETTING 1.

! When selecting FM as the source, you cannot

switch to

SRC LV ADJUST.

! If you do not operate functions within about

30 seconds, the display automatically returns
to the ordinary display.

Using balance adjustment

You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.

Use MULTI-CONTROL to select

FADER/BALANCE in the audio function
menu.

Press MULTI-CONTROL to display the

setting mode.

Press MULTI-CONTROL to select the seg-

ment you wish to set.
Press

MULTI-CONTROL repeatedly to switch

between fader and balance.

Turn MULTI-CONTROL to adjust speaker

balance.
Front/rear speaker balance can be adjusted
between

FAD F15 and FAD R15.

Left/right speaker balance can be adjusted be-
tween

BAL L15 and BAL R15.

# You can also perform the same operations by
pushing

MULTI-CONTROL up or down.

# FAD 0 is the proper setting when only two
speakers are used.
# When the rear output setting is SUB W, ad-
justing the front/rear speaker balance is not effec-
tive. Refer to Setting the rear output and
subwoofer controller on page 30.

Using the equalizer

The equalizer lets you adjust the equalization
to match the car

’s interior acoustic character-

istics as desired.

Recalling equalizer curves

There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.

Audio Adjustments

English

Section