Panasonic KX-TDA15 - Manual (Page 39)

1.2 Making Calls
User Manual 39
For a called extension
To check the left message and call back
To call back
To clear message waiting indications left on your extension
• The Message button light or Message/Ringer Lamp shows the current status as follows:
Off: No message
Red on: You have a message.
• The display shows the messages starting with the most recent call.
• At a called extension, the MESSAGE button allows you to clear message waiting indications
if you do not want to call the callers back. To clear, press the MESSAGE button and then press
the soft button.
• On your PT, you can establish one or more Message for Another Extension buttons. These
buttons can accept the message waiting notification of other extensions or various incoming
call distribution groups.
In other words, you can monitor the message waiting notifications of other telephones.
• A single line telephone extension user will receive a special dial tone as message waiting
notification when going off-hook.
While on-hook
PT/PS
Press MESSAGE
until the desired
extension appears.
Off-hook. Talk.
MESSAGE
Off-hook. Press MESSAGE or enter 70 and then 2.
PT/SLT/PS
Talk.
OR
MESSAGE
0 2 7
PT/SLT/PS
Off-hook. Enter 0. On-hook. Dial your
extension number.
0 0 7
Enter 70.
your
extension no.
C.Tone