Philips 14PV340 - Manual (Page 9)

h If you want to change the automatic tv channel setting,
select the line ’
Fine tuning ’.
With the DSr or SqC button you can vary the
automatic tv channel setting. Important: This re-tuning is
only necessary and useful in special cases, e.g.: when
there are stripes on the picture with cable-TV systems.
i Press the OK button to store the TV channel.
D If you want to search for further TV channels, start
again at step e .
j To end, press the MENU button.
Manual radio channel search
a Press the MENU button. The main menu appears.
b Select the line ’ Installation ’ with the P rB or
AP q button and confirm with the SqC button.
c Select the line ’ Radio store ’ with the P rB or
AP q button and confirm with the SqC button.
RADIO STORE
Frequency search 123.4
Programme number 02
ã Exit:
press MENU
d If you know the frequency of the desired radio channel,
you can enter the data in line ’
Frequency search ’
with the digit buttons 0-9 .
D If you don´t know the frequency of the radio channel
of your choice, press the SqC button to start
the channel search.
e In the line ’ Programme number ’ select the
programme number you want e.g.: ’ 01 ’, using the
DSr or SqC button.
f Press the OK button to store the radio channel.
D If you want to search for further radio channels,
start again at step d .
g To end, press the MENU button.
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket
EXT.1 .
To do this, select the channel number ’ E1 ’ with the
P pAB button. You will have to select the channels to be
received by the satellite receiver on the receiver itself.
Special installation functions
You can select one of the following installation functions in
order to adapt your TV-VIDEO Combi to your own specific
requirements.
Automatic TV channel search
Your TV-VIDEO Combi will search for all TV channels.
If you want to start the automatic TV channel search again,
then follow the instructions below.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’ Installation ’ with the P rB or
AP q button and confirm with the SqC button.
c Select the line ’ Autostore ’ with the P rB or
AP q button.
d Press the SqC button.
e Select the country you are in with the P rB or
AP q button.
If your country doesn’t show up, select ’ OTHER ’.
f Confirm with the OK button. The ’Automatic TV channel
search’ starts.
Searching ...
CHANNELS FOUND: 06
Radio channels stored: 7
//////,,,,,,,,,,,,,,,,,,,,,
g When the TV channel search is complete,
’
Autostore ready ’ will appear on the screen.
7