Philips 14PV340 - Manual (Page 20)

D If ’
Daily error ’ appears on the TV screen, the
date was incorrectly entered. Daily programming
can only be used for recordings to be made from
Monday to Friday.
D Under ’
VPS/PDC ’, use the P rB or AP q
button to switch ’VPS or PDC’ on or off.
D Under ’
LP ’, use the P rB or AP q button to
select the recording speed ’SP’ or ’LP’.
D The TIMER lamp on the front of the set lights up
when one or more of the TIMER blocks are
occupied.
D When you are recording, the red recording light at
the front panel of the TV-VIDEO Combi will be lit.
D If the end of the cassette is reached during a
recording, the TV-VIDEO Combi automatically ejects
the cassette.
D If you forget to load a cassette, ’
No cassette ’
will appear.
D If you inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected.
f Confirm with the OK button.
E ’
To record press STANDBY ’ will appear on
the screen. If you have programmed a recording that
should start within the next few minutes, confirm with the
STANDBY m button. If you have programmed a recording
that will start at some later point in time, confirm with the
OK button.
D A programmed recording can only start, when the
machine is switched to standby.
D If you entered the wrong date for a daily/weekly
recording, your TV-VIDEO Combi will correct it
automatically.
g If you confirmed with the OK button, exit the menu with
the TIMER k button.
Programming a recording (without
’SHOWVIEW’)
a Press the TIMER k button on the remote control.
b Select the line ’ TIMER PROGRAMMING ’ with the
P rB or AP q button and confirm with the
SqC button.
TIMER PROGRAMMING
VPS
DATE PROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-- -- --:-- --:-- - - -----
Exit: Start:
press TIMER press
c Press the SqC button.
TIMER PROGRAMMING
VPS
DATE PROG.START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
Exit: Start:
press TIMER press
d Select the entry field with the DSr or SqC
button.
e Enter information with the P rB or AP q button or
with the digit buttons 0-9 .
D Under ’
REP. ’, use the P rB or AP q button to
select daily or weekly programming.
’
Mo-Fr ’: Recording from Monday to Friday.
’ Mo-Su ’: Recording from Monday to Sunday.
’ WEEKL ’: Recordings every week on the same day.
D Under ’
VPS/PDC ’, use the P rB or AP q
button to switch ’VPS or PDC’ on or off.
f Confirm with the OK button when the information is
correct.
18