How to check or change a timer, How to clear a timer – Philips 14PV340 User Manual
Page 21
E ’
To record press STANDBY
’ will appear on
the screen. If you have programmed a recording that
should start within the next few minutes, confirm with the
STANDBY m
button. If you have programmed a recording
that will start at some later point in time, confirm with the
OK
button.
D A programmed recording can only start, when the
machine is switched to standby.
D If you entered the wrong date for a daily/weekly
recording, your TV-VIDEO Combi will correct it
automatically.
g
If you have confirmed with the
OK
button, use the
TIMER k
button to exit the menu.
D The programming information has been stored in a
TIMER block.
h
Make sure that the cassette you have put in can be
recorded on.
How to check or change a TIMER
a
Press the
TIMER k
button on the remote control.
b
Select the line ’
TIMER PROGRAMMING
’ with the
P rB
or
AP q
button and confirm with the
SqC
button.
c
Select the TIMER you want to check or change with the
P rB
or
AP q
button and confirm with the
OK
button.
d
Select the entry field with the
DSr
or
SqC
button.
e
Change any information with the
P rB
or
AP q
button or with the
0-9
buttons.
D Under ’
LP
’, use the
P rB
or
AP q
button to
select the recording speed ’SP´ or ’LP´.
f
Confirm with the
OK
button.
g
To end, press the
TIMER k
button.
h
Make sure that the cassette you have put in can be
recorded on.
How to clear a TIMER
a
Press the
TIMER k
button on the remote control.
b
Select the line ’
Timer programming
’ with the
P rB
or
AP q
button and confirm with the
SqC
button.
c
Select the TIMER you want to clear with the
P rB
or
AP q
button.
d
Press the
CLEAR
button.
e
Switch off with the
TIMER k
button.
19