Panasonic CF-VDM292U - Manual (Page 14)

14
E
You can run WinDVD using either of the following procedures.
Double-click on the desktop.
Windows XP
Select [start] - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD].
Windows 2000
Select [Start] - [Programs] - [InterVideo WinDVD] - [InterVideo WinDVD].
Select “?” of the WinDVD control panel.
Right-click on the WinDVD screen and select [Help].
Running WinDVD
WinDVD
Using the Software
Installing WinDVD
WinDVD is a software application for DVD playback.
Here, you will find explanations and general information on the installation procedure and
how to access the online manual.
1
Set “DVD Drive Utility Disc” in the drive. (
page 12 step 1 )
2 Select [WinDVD Setup].
3
Select [Next] at the Welcome Message.
4
After reading the “License Agreement”* 1 , select [Yes] if you agree to the terms.
* 1 Refer to the “LIMITED USE LICENSE AGREEMENT” on the Operating Instructions of the
computer.
5
Follow the on-screen instructions and install WinDVD.
NOTE
Do not enter the standby or hibernation mode, or switch the display by pressing
Fn + F3 while WinDVD is running.
Do not start WinDVD while the hard disk drive indicator is blinking immediately
after the computer was started up.
During video playback, do not perform the following.
• Ejecting the disc
• Using other applications or the Command Prompt
• Changing the settings of the screen properties
If you maximize the video display window, you can return to the original window
size by double-clicking over the images.