beautypg.com

Understanding auto ta and eq error, Messages, Understanding auto ta and eq error messages – Pioneer AVH-P3100DVD User Manual

Page 98: Additional information

background image

iPod

Message

Cause

Action

Error-02-6X/-9X/-DX

Communication failure

Disconnect the cable from iPod. Once iPod
main menu is displayed, connect the cable
again.
Reset the iPod.

iPod failure

Disconnect the cable from iPod. Once iPod
main menu is displayed, connect the cable
again.
Reset the iPod.

Error-02-67

Old version of iPod

Update the iPod version.

No Songs

No songs

Transfer the songs to iPod.

Stop

No songs in the current list

Select a list that contains the songs.

Understanding auto TA and EQ error messages

When correct measurement of car interior acoustic characteristics is not possible using the auto
TA and EQ, an error message may appear on the display. If an error message appears, refer to the
table below to see what the problem is and the suggested method of correcting the problem. After
checking, try again.

Message

Cause

Action

Error. Please check MIC.

Microphone is not connected.

Plug the supplied microphone securely into
the jack.

Error. Please check Front
speaker., Error. Please check
Front-L speaker., Error. Please
check Front-R speaker., Error.
Please check Center speaker.,
Error. Please check Rear
speaker., Error. Please check
Rear-L speaker., Error. Please
check Rear-R speaker., Error.
Please check Subwoofer.

The microphone cannot pick up the
measuring tone of a speaker.

! Confirm that the speakers are connected
correctly.
! Correct the input level setting of the power
amp connected to the speakers.
! Set the microphone correctly.

Error. Please check noise.

The surrounding noise level is too
high.

! Stop your car in a place that is as quiet as
possible, and switch off the engine, air condi-
tioner or heater.
! Set the microphone correctly.

Additional Information

En

98

Appendix