Pioneer AVH-P3100DVD - Manual (Page 51)

# When no subwoofer is connected to the rear
output, select
Full (full-range speaker).
# When a subwoofer is connected to the rear
output, select
Subwoofer (subwoofer).
# When the rear output setting is Subwoofer,
you cannot operate the following procedure.
3 Touch c or d next to Preout to switch
the subwoofer output or rear output.
Touching c or d will switch between
Subwoofer and Rear and that status will be
displayed.
Notes
! Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to Using subwoofer output on page
44).
! If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
! Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Changing languages for
CAUTION
Some operations on this unit are prohibited
while driving or needs to be paid a careful at-
tention when operating. In such case, a cau-
tion appears on the display. You can change
the language of the cautions at this setting.
% Touch Caution Language on the initial
menu to select your desired language.
Each time you touch
Caution Language it se-
lects languages for CAUTION in the following
order:
English (English)
—Español (Spanish)—
Français (French)
Switching the sound
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
% Touch TEL on the initial menu to select
the setting.
Touch
TEL until the desired setting appears in
the display.
! Mute – Muting
! ATT-20dB – Attenuation (ATT -20dB has a
stronger effect than ATT -10dB)
! ATT-10dB – Attenuation
! Off – Turn the sound muting/attenuation
off
Notes
! The sound is turned off, Mute is displayed
and no audio adjustments are possible.
! The sound is attenuated, ATT is displayed and
no audio adjustments, except volume control,
are possible.
! Operation returns to normal when the phone
connection is ended.
Entering PIN code for
Bluetooth wireless connection
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to
enter PIN code on your phone to verify the
connection. The default code is
0000, but you
can change this in this function.
! With some Bluetooth audio players, you
may be required to enter the Bluetooth
audio player PIN code in advance to set
this unit for a connection.
! You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
Initial Settings
En
51
Section
15
Initial
Settings