Pioneer AVH-P3100DVD - Manual (Page 59)

% Insert the stereo mini plug into the
AUX input jack on this unit.
For more details, refer to What
’s what on page
11.
IP-BUS-RCA interconnector (AUX-2)
When connecting auxiliary device using an IP-
BUS-RCA Interconnector (sold separately)
% Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separately)
to connect this unit to auxiliary device fea-
turing RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner
’s manual.
# You can only make this type of connection if
the auxiliary device has RCA outputs.
Selecting AUX as the source
% Touch the source icon and then touch
AUX-1/AUX-2 to select AUX as the source.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, refer to
Switching the auxiliary setting on page 50.
Setting the AUX title
The title displayed for the AUX source can be
changed.
! Each title can be up to 10 characters long.
1 After you have selected AUX as the
source, touch AV Menu and Function Menu
and then touch Name Edit.
# When the touch panel keys are not displayed,
you can display them by touching the screen.
2 Touch ABC to select the desired charac-
ter type.
Touch
ABC repeatedly to switch between the
following character types:
Alphabet (upper case)
—Alphabet (lower case)
# You can select to input numbers and symbols
by touching
123.
3 Touch a or b to select a letter of the al-
phabet.
4 Touch c or d to move the cursor.
5 Touch OK to store the entered title in
memory.
6 Touch ESC to return to the ordinary dis-
play.
Using the external unit
External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
Basic operations of the external unit are ex-
plained below. Allocated functions are differ-
ent depending on the connected external unit.
For details concerning functions, refer to exter-
nal unit
’s owner’s manual.
Selecting the external unit as
the source
% Touch the source icon and then touch
EXT-1/EXT-2 to select external unit as the
source.
Basic operation
Functions allocated to the following opera-
tions are different depending on the con-
nected external unit. For details concerning
functions, refer to the connected external
unit
’s owner’s manual.
% Touch Band.
% Keep touching Band.
% Touch c or d.
% Keep touching c or d.
% Touch a or b.
Other Functions
En
59
Section
18
Other
Functions