Philips VR 708/07 - Manual (Page 51)

E
NGLISH
S
WITCHING THE MODULATOR ON
/
OFF
51 51
SSw wiittcchhiinngg tthhee m moodduullaattoorr oonn // ooffff
If picture and sound interference cannot be removed by optimising the
modulator, the integral modulator can be switched off.Warning: this is
only possible if you have connected the video recorder to the TV set
with a scart cable. It is not possible to operate with the modulator
switched off without a scart cable.
FFO ORR
EEX XPPEERRTTSS
7 Leave the on-screen menu with the M MEEN NU U
button
6 Confirm the new modulator frequency with
O OK K.
SSw wiittcchhiinngg ooffff tthhee m moodduullaattoorr
If you have connected the video recorder to the TV set
with a scart cable, you can switch off the modulator
when there is interference with the picture or sound
(see below).
1 Switch the video recorder on and make sure
there is no cassette in the video recorder
3 The display shows “M ON”. The video recor-
der will now transmit a test image on this
frequency
2 Press simultaneously the EEJJEEC CTT button J J on
the front of the video recorder and the
button PPRRO OG GRRA AM MM MEE -- until the display
shows the modulator frequency (e.g.“M583”
or “CH35”)
4 Use ==PP-- or ;;PP++ to select the option
“MODULATOR”
7 Leave the on-screen menu with the M MEEN NU U
button
6 Confirm with O OK K. The screen will show the
message “STORED”. The display shows
“MOFF”
5 Use P P or Q Q to select the setting “ON”
(Modulator on) or “OFF” (Modulator off)
M 5 8 3
OPTIMIZE MODULATOR
OPTIMIZE Q583P
MODULATOR ON
CHANNEL/FREQ. FREQ
TO EXIT
PRESS MENU
-
J