Philips VR 708/07 - Manual (Page 45)

E
NGLISH
A
UDIO
D
UBBING
45 45
3 Press the M MEEN NU U button.The on-screen menu
appears
4 Use ==PP-- or ;;PP++ to select the option
“RECORDING FUNCTIONS” and confirm
with P P
5 Use ==PP-- or ;;PP++ to select the option
“AUDIO DUBBING” and confirm with P P
0 On the connected sound source start the
playback of the sound signal and press
ssiim muullttaanneeoouussllyy the Record button n on the
remote control of the video recorder to start
the recording.
B Finish with the M MEEN NU U button
6 The video recorder switches to still picture
7 Wind to the space on the tape, where the
dubbing should end, and with the button
C CLLEEA ARR ((C CLL)) set the counter to “00:00:00”
8 Wind to the space on the tape, where the
dubbing should begin, and press R R .The video
recorder switches to still picture
9 Press R (still picture) several times until the
desired point is reached and confirm with the
Stop button h
A The new sound signal is being recorded. As
soon as the tape position previously marked
with “00:00:00” is reached, the dubbing will
stop automatically
PPRRO OBBLLEEM M
8 8 TThhee ttaappee ssttooppss aauuttoom maattiiccaallllyy aanndd tthhee
““RREECCOORRDDIINNGG FFUUNNCCTTIIOONNSS”” ssccrreeeenn aappppeeaarrss
4 4 The end of the tape was reached during winding
or playback. Go back to step 5 , to start this
procedure again.
M Maakkee dduubbbbiinngg aauuddiibbllee
To make dubbing audible, you must select the “MIX” or
“MONO” sound channel setting (see “Selecting the sound
channel”).
MAIN MENU
RECORDING FUNCTIONS
ÂÅ RECORD SETTINGS Å
AUDIO ONLY
AUDIO DUBBING
TO EXIT
PRESS MENU
É
T TIIPP