Panasonic PT-AE500U - Manual (Page 12)

PC
POWER
LIGHT
INPUT
ENTER
MENU
FREEZE NORMAL
ASPECT USER
MEMORY
PICTURE
MODE
VIDEO CMPNT
COMPONENT
KEYSTONE
˛ $
˛ &
˛ '
˛ '
˛ #
˛ (
˛ )
E NGLISH -23
Basic
operation
22-E NGLISH
Turning on the power
Before turning on the power
1, Ensure that all components
are connected properly.
2, Connect the accessory power cord.
3, Remove the lens cover.
Press the MAIN POWER switch to turn on the
power.
BThe power indicator on the projector will illuminate red.
Press the POWER button.
BThe power indicator on the projector will flash green. After a short
period, the indicator will illuminate green, and a picture will be
projected.
Turn on the power of all connected devices.
BStart the play function of a device such as a DVD player.
NOTE:
B A tinkling sound may be heard when the lamp unit is turned on, but
this is not a sign of a malfunction.
#
$
%
Power indicator
power cord
Lens cover
Press the input select button to select the
input signal.
BA picture will be projected in accordance with the selected input signal.
Follow the procedure below when you set the projector up first, and when
you change the setup place.
Adjusting the size
BTurn the zoom ring to adjust
the size of the projected image.
Adjusting the focus
BTurn the focus ring to adjust
the focus of the projected image.
&
'
(
)
Adjusting the angle
BWhile pressing the adjuster buttons,
adjust the forward/back angle of tilt
of the projector. Adjust so that the
projector is as vertical to the screen
as possible.
Input select
button
Changing
signals
Input select
button
Changing
signals
Control
panel
Remote
control
unit
VIDEO
VIDEO S-VIDEO Y·PB·PR
PC DVI
VIDEO
S-VIDEO
CMPNT
Y·PB·PR
PC
PC
DVI
Zoom
Focus