Palsonic TFTV1720D - Manual (Page 19)

TV Function
18
Skip
Use the , buttons to select SKIP, press the , buttons to select ON or OFF.
When select ON, it will skip the current channel when using the , buttons to select channels
under normal playback status.
When select OFF, it will play the channels in sequence when selecting under normal playback
status.
Swap
Use the , buttons to select SWAP, press the , buttons to change the channel number.
Then press the , buttons to confirm, the current channel will change to the selected channel.
Search (Semi-auto. Searching)
If the tuning can't find a certain station, you can use the Search for Semi-auto. Searching, during
the searching, the unit will search for channel downward or upward. If it searches a channel, it will
stop searching automatically.
Press the , button to move cursor to Search item.
Press the , button to search the TV program in higher or lower frequency, until the unit
searches the desired program. Press the , buttons again or OK button to stop searching.
Fine Tuning
Press the , button to move cursor to FINE TUNING.
Press the , buttons to fine tune forward and backward.
Sometimes activate the function to get the better effects. When fine tuning, the AFC will turn OFF
automatically.
Auto Memory
Press the , button to move the cursor to "Auto Memory".
Press the direction buttons to enter auto memory mode, and screen will display as below:
The auto memory needs a few minutes, just wait patiently, when tuning operations completes the
unit will exit and memorise the programs by sequence.
During tuning, press the button to exit the auto memory as the programs selected and the unit
will memorise them automatically.
SEARCHING
EXIT:
VHF-L
CH: 001
22%