C. identifying the parts – Primera Technology LX810 User Manual
Page 7
C. IDENTIFYING THE PARTS
This illustration shows the front of the printer with its control
buttons and LED indicator lights.
The Pause Button pauses the printer AFTER the printing of the
current label has finished to allow for loading of label stock
and ink cartridges.
The
Pause LED
is lit when the printer is paused. Press the
Pause Button to resume printing.
The
Power LED
indicates that the printer is on and ready to
receive print jobs.
The
Load/Feed Button
is pressed in order to load label stock or
form feed the label stock through the printer.
The
Ink Low LED
will illuminate when a cartridge has 10% or
less of its ink remaining.
The
Unload Button
will unload the installed label stock by
reversing it through the printer. Make sure to tear off the print-
ed labels before pressing the Unload Button.
NOTE: Always use this procedure to unload label material. DO NOT
ALLOW THE END OF THE ROLL TO FEED THROUGH THE
MACHINE!
The
Label Tear Bar
is a serrated edge for conveniently tearing
your finished labels from the printer.
WARNING. Sharp Edges. Keep fingers and other body parts away from the
tear-off bar.
Unload Button
Pause Button
Pause LED
Power LED
Load/Feed
Button
Ink Low LED
Label Tear Bar
Top Cover
Getting Started 3
510943.qxd 11/27/2007 11:25 AM Page 3
TOC
INDEX