Patton electronic T1/E1 CHANNELIZED GIGABIT ROUTER 2884 - Manual (Page 42)

Introduction 42
OnSite Model 2884 User Manual C • Cabling
Introduction
This section provides information on the cables used to connect the OnSite and the interface cards to the exist-
ing network infrastructure and to third party products.
Console
The OnSite can be connected to a serial terminal over its serial console port, as depicted in figure 12 .
Figure 12. Connecting a serial terminal
Note See section “Console port” on page 47 for console port pin-outs.
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
CAUTION
Serial Terminal
Note A Patton Model 16F-561 RJ45 to DB-9 adapter is included with
each IpLink 288x device