Pentax Optio S - Manual (Page 34)

63
T
aking Pictures
62
T
aking Pictures
Taking Stereo Pictures (3D Image Mode)
You can take 3D pictures using the LCD monitor and view them
by the parallel method or cross method (p.65). If you print out
the 3D pictures and look at them through the 3D image viewer
provided, the image will appear in three dimensions.
Select the viewing mode.
The default setting is [Parallel]. If you do not need to switch to
[Cross], go to Step
b.
z
Press the MENU button.
The [ Rec. Mode] menu will be
displayed.
x
Press the four-way controller ( ̆̄)
to select [3D Mode].
c
Use the four-way controller ( ̇̈)
to select [Parallel].
To view the picture with the 3D image viewer, select [Parallel].
You can also view it without the image viewer.
v
Press the OK button.
The 3D image mode screen appears again.
Take the pictures
b
Press the four-way controller ( ̄) in Capture mode.
The virtual mode dial appears.
n
Use the four-way controller ( ̇̈) to select the 3D mode
.
Rec. Mode
Digital Zoom
Instant Review
Fast Fwd Movie
3D Mode
Memory
Sharpness
Exit 2/3 Ok OK MENU
Off
2sec
On
Parallel Mode
xcvbnm
,⁄0
z
Using Preset Function Settings (User Mode)
In User mode, you can take pictures using the functions and
settings registered in advance in User mode.
z
Press the four-way controller ( ̄) in
Capture mode.
The virtual mode dial appears.
x
Use the four-way controller ( ̇̈) to
select User mode ( ).
c
Press the OK button.
v
Press the shutter release button.
The picture is taken.
Registering Functions in User Mode
☞
p.75
v
zxc
11:19 11:19
10/20/2003 10/20/2003
5 5
e03_kb341_028_078_41e.qk 1/28/03 18:21 Page 62