Pentax Optio S User Manual
Page 32

58
T
aking Pictures
59
T
aking Pictures
Caution
n
Move the camera to the right and
take the second picture.
Repeat the above procedure to take
the third and subsequent pictures.
m
Press the OK button.
The screen returns to Step
v.
To cancel Panorama mode, change to another mode.
• The camera cannot join the images. Use the panorama
software provided with the camera.
• Continuous shooting is not possible in Panorama Assist
mode.
• A computer that supports Windows is necessary for join-
ing images to form a panorama picture. (The software
provided with the camera is not supported by Macintosh.)
memo
Taking Panorama Pictures (Panorama Assist Mode)
You can take a number of images and join them together to
form a panorama picture. The panorama software provided with
the camera and a computer that supports Windows are neces-
sary for joining the images.
z
Press the four-way controller (
̄)
in Capture mode.
The virtual mode dial appears.
x
Use the four-way controller (
̇̈)
to display the Panorama Assist
mode (
)
at the top of the dial.
c
Press the four-way controller (
̄).
v
Use the four-way controller to
choose the direction in which the
images will be joined.
̇
Joins the images at the left.
̈
Joins the images at the right.
̆
Joins the images at the top.
̄
Joins the images at the bottom.
The example shows the images when
̈
is selected.
b
Take the first picture.
Press the shutter release button to
take the first image. The right edge
of the image is displayed in trans-
parent form on the left of the LCD
monitor.
S e t s h i f t d i r e c t i o n
S e t s h i f t d i r e c t i o n
b
zxcvm
e03_kb341_028_078_41e.qk 1/28/03 15:39 Page 58