Precor Total Body 904 - Manual (Page 6)

page 6
Diagram 2
904 Hardware kit.
A
B
C
D
E
Open the hardware kit and make sure that you have the following items. See
Diagram 2. As you identify the contents of the kit, check them off below.
(A) two safety stops—front lift bar installation
(B) two bolts—front lift bar installation
(C) two washers—front lift bar installation
(D) two locking pins—handrail installation
(E) one 1/4" hex key—treadmill assembly and belt adjustment
If any items are missing, contact your authorized Precor dealer. For the dealer
nearest you, call 1-800-4-PRECOR.
CAUTION: After assembling
the treadmill, place the hex
key in a safe and secure place.
If the running belt should
move off-center, you can use
the 1/4" hex key to align it.