Planet Technology VIP-320 - Manual (Page 9)

9
LED Display & Button
Front Panels Descriptions
Paring LED When the base connect to the handset
Battery Charge When charging the handset’s battery.
Handset charge Holder Holder the handset
Intercom When it pairing
LED Indicators Descriptions
LINE LINE LED will light when PSTN.line is in use
VoIP VoIP LED will light when talking through VoIP.
Status The Status LED will be flashing when the machine is operational
Ready Ready LED will be ON when the registration toward the GK/SIP proxy is
successful.
Back Panels Descriptions
DC9V Power Adapter connecter
LINE Connect to the RJ-11 phone line
Reset Reset to the default setting
LAN 1 / LAN 2 10/100Mbps Ethernet port, used to connect PC or NB.
WAN 10/100Mbps Ethernet port, used to connect ADSL or cable modem.
The Default LAN IP is http://192.168.0.1 . Press RESET button
on rear panel over 20 seconds will reset the VoIP Router
to this default LAN/WAN IP address and Username/Password
function.
Í
Note