Planet Technology VIP-320 - Manual (Page 44)

BS setting
Base setting is using for factory mode, after modify BS setting, please
restart the base!
Factory default PIN is 1590 /
Press / button to select [BS setting]. Press button to
confirm and the display will show [PIN: ]
Enter the four digits base PIN. (factory default PIN is 1590)
MASTER mode
1.1 Press button to select [ 1 L Count 3 ]
Press and button to 1L Count 1
Press and button to 1L Count 2
Press and button to 1L Count 3
default
This setting for use PSTN / SKYPE / Group Calls
Please DO NOT change factory default value, the DCT-100 may
become annulment!
1.2 Press button to select [ 2 CALLWAIT Y]
Press and button to 2 CALLWAIT Y default
Press and button to 2 CALLWAIT N
This setting is for use call waiting.
Please DO NOT change factory default value, the DCT-100 may
become annulment!
1.3 Press button to select [3.HS VOL3 HS]
This setting is to adjust local handset speaker volume.
Please DO NOT change factory default value, the DCT-100 may
become annulment!
1.4 Press button to select [4 FAR VOL 7]
This setting is to adjust remote handset speaker volume.
Please DO NOT change factory default value, the DCT-100 may
HS setting
>BS setting
PIN:
MASTER:?
1 L Count 3
2 CALLWAIT Y
3.HS VOL3 HS
4 FAR VOL
44