Panasonic SC-AK100 - Manual (Page 5)

Before using
5
RQT6351
Set-up
Connect the AC power supply cord only after all other connections have been made.
Preparation
Twist and pull off the vinyl tip of the antenna wires and speaker cords.
3 Speakers
Placement
Use only the supplied speakers.
The combination of the main unit and speakers provide the best
sound. Using other speakers can damage the unit and sound
quality will be negatively affected.
Connect each end of the speaker cables to the terminal lever of the
same color so (+) and (–) are correct. Never allow the exposed wires
to contact each other when connected.
Incorrect connection can damage the unit.
Connections
Notes
•
Keep your speakers at least 10 mm ( 13 /
32
”) away from the system
for proper ventilation.
•
These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
•
You cannot take the front net off the speakers.
1 FM indoor antenna
Adhesive tape
Fix where
reception is
best.
2 AM loop antenna
Stand the antenna up
on its base.
4 AC power supply cord
Note
The included AC power supply
cord is for use with this unit only.
Do not use it with other equipment.
For your reference
Information you enter into the unit’s
memory, except for time, remains
intact for up to a week after the
AC power supply cord is
disconnected.
Identical
2
R
TO SB-AK1
00
SPEAKERS (6
Ω )
L
Black (–)
Red (+)
Black
Red
Connect the left (L) side
in the same way.
Caution
•
Use the speakers only with the recommended
system. Failure to do so may lead to damage
to the amplifier and/or the speakers, and may
result in the risk of fire. Consult a qualified
service person if damage has occurred or if
you experience a sudden change in
performance.
•
Do not attach these speakers to walls or
ceilings.