beautypg.com

Turning the demo function off, Convenient functions, Auto-off function – Panasonic SC-AK100 User Manual

Page 12: Setting the time

background image

12

Timer operations

RQT6351

A demonstration of the display is shown if you have not set the clock.
You can reduce the power consumed in standby mode by turning it
off.
During standby mode

Hold down [

L

/–DEMO] until “NO DEMO” is displayed.

Every time you hold down the button:
NO DEMO (off)

DEMO ON (on)

To show a demonstration of the display

Hold down [

L

/–DEMO] until “DEMO ON” is displayed.

Note

DEMO function cannot be turned on when Dimmer is on.

Convenient functions

Auto-off function

Setting the time

Remote control only

Turning the demo function off

To dim the display panel

Remote control only

Press [DIMMER].

The display is dimmed and the indicator is turned off.
(The AC supply indicator remains on.)
Press [DIMMER] again to restore the display.

To mute the volume

Remote control only

Press [MUTING].

Press the button again to cancel.
“MUTING” goes out.
To cancel from the unit, turn [VOLUME] to minimum (--dB), then raise
it to the required level.
Muting is also cancelled when the unit is turned off.

When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for ten minutes.
This function does not work if the source is tuner or AUX.

Hold down [–AUTO OFF].

“AUTO OFF” is shown on the display.

The setting is maintained even if the unit is turned off.
If you select tuner or AUX as the source, “AUTO OFF” goes out. It
comes on again when you select disc or tape.

To cancel
Hold down [–AUTO OFF] again.

This is a 12-hour clock.

1

Switch on the power.

2

Press [CLOCK/TIMER] to select “CLOCK”.

Every time you press the button:

3

(within 7 seconds or so)

Press [

g

/REW/

3

] or [

4

/FF/

f

] to set the time.

4

Press [CLOCK/TIMER] to finish setting the time.

The display will return to whatever was displayed before you set
the time.

To display the time
Press [CLOCK/TIMER] once when the unit is on or at standby mode.
The time is shown for about 5 seconds.

Note

Reset the clock regularly to maintain accuracy.

SLEEP

–AUTO OFF

DEMO

1

3

2 • 4

Remote control only

Previous display

CLOCK

REC

PLAY