POLAR GBR User Manual
Page 8
13
12
SETTING HEIGHT
If you are in the Time of day display start from User
information, steps 1-3. Then press OK until
CM or FT / INCH appears and the digits of
centimetres/feet are flashing.
4. Press Scroll Up or Scroll Down to adjust
your height.
5. Press OK to lock your selection.
You can change the height unit between cm and ft/
inch in watch settings.
24 h time mode -> cm
12 h time mode -> ft
Continue by setting your age or return to the Time of day
display by pressing and holding OK.
SETTING AGE
If you are in the Time of day display start from User
information, steps 1-3. Then press OK until
AGE appears and the digits for years are flashing.
4. Press Scroll Up or Scroll Down to adjust
your age.
5. Press OK to lock your selection.
Continue by setting your gender or return to the Time of
day display by pressing and holding OK.
USER appears, 1 or 2 is flashing.
4. Press Scroll Up or Scroll Down to select USER 1
or USER 2.
5. Press OK to lock your selection.
You have now selected the user id. All settings are made
to the selected user.
In File, Measure, Options and Fitness test main
modes you can change the user id by pressing and
holding Scroll Up.
If you want to disable the user id 2, set the weight of the
user 2 to zero.
Continue by setting your weight or return to the Time of
day display by pressing and holding OK.
SETTING WEIGHT
If you are in the Time of day display start from User
information, steps 1-3. Then press OK until
KG or LBS appears and the digits of kilograms/
pounds are flashing.
4. Press Scroll Up or Scroll Down to adjust your
weight.
5. Press OK to lock your selection.
You can change the weight unit between kg and lbs
in watch settings.
24 h time mode -> kg
12 h time mode -> lbs
Continue the user settings or return to the Time of day
display by pressing and holding OK.
man M91ti GBR B
14.1.2001, 01:09
12-13