Panasonic PT-D5700UL - Manual (Page 49)

49
Network config page
Click [Network set up], then [Network config] to display the Network config page.
Network status page
Click [Network set up], then [Network status] to display the Network status page.
Set this to ON to enable the DHCP client
function.
Enter the IP address if DHCP server is
not used.
Enter the gateway address if DHCP
server is not used.
Enter the name of the projector here. Enter the host name
here if it is required when the DHCP server is going to be
used, for instance.
Enter the subnet mask if DHCP server is
not used.
MAC address display
Network status display
Set IP address display
Set subnet mask display
Network software version display